kisslobi.blogg.se

1. CLOVER CONFIGURATOR SOURCEFORGE MAC OS
2. CLOVER CONFIGURATOR SOURCEFORGE INSTALL
3. CLOVER CONFIGURATOR SOURCEFORGE DRIVERS
4. CLOVER CONFIGURATOR SOURCEFORGE MAC

CLOVER CONFIGURATOR SOURCEFORGE MAC

Select the model and version of Mac that closest matches your hardware specifications. If your CPU is a Haswell model, you should also select KernelHaswellE. You will probably want Kernel CPU, KernelPM, and Apple RTC selected here. It usually won’t hurt anything, but if you boot your installer to a kernel panic, these should be the first items to deselect. You can enable Inject Intel or Inject NVidia here, or you can leave them unchecked. Here, you may need to enable the following under USB:

CLOVER CONFIGURATOR SOURCEFORGE DRIVERS

kext-dev-mode=1, so some of our non-Apple drivers can load properly.This is just to be on the safe side until you can get the alternate Nvidia web drivers installed and functioning. nv_disable=1, if your graphics card is Nvidia-based.Verbose (-v), so you can see what’s going wrong when something doesn’t work right.The most common options you’ll need to select here are: I don’t typically have anything selected here. If you don’t see a section listed, it’s because there aren’t any recommendations for that group. Here, however, are some of the common things you’ll need to have selected. This is going to vary based on your motherboard chipset, CPU, and graphics card. Once you have your ist open in Clover Configurator, go through the options one by one and select what you need. From Clover Configurator, you can mount your EFI partition to edit your ist file When you open Clover Configurator, there’s an easy option called Mount EFI Partition that will help you locate the one on your USB drive and get into it. You’ll need to use Clover Configurator to edit the ist file from your EFI partition. By default, the Clover configuration can turn on things you simply don’t need. A few more steps before we can begin installing macOS High Sierra Beta. In a few moments, the process will complete. Then click Install, and you’ll be asked for your password. Under Drivers64UEFI, check EmuVariableUefi–64 and OsxAptioFix2Drv–64.Themes can be checked, if you want pretties.

CLOVER CONFIGURATOR SOURCEFORGE INSTALL

Install Clover in the ESP should be checked.Install for UEFI booting only should be checked.When it asks for the install location, choose your USB drive and then choose Customize. Double-click the Clover installation package, and follow the prompts. Once you see “Done” in the Terminal, it will be time to install the Clover bootloader. Once this process completes, you’ll be one step closer to creating your macOS High Sierra Public Beta Hackintosh. It will take some time for the process to complete, so go get a cup of coffee or a Mountain Dew. You’ll be prompted for your account password, so enter that and press Enter. sudo /Applications/Install\ macOS\ High\ Sierra\ Beta.app/Contents/Resources/createinstallmedia -volume /Volumes/USB -applicationpath /Applications/Install\ macOS\ High\ Sierra Beta.app -nointeraction Open Terminal, make sure your USB drive is plugged in, and type these commands. The macOS High Sierra Public Beta installation app has just what we need. Next, we’ll create the bootable installation USB drive. Creating the Installation USB Drive for your Hackintosh

CLOVER CONFIGURATOR SOURCEFORGE MAC OS

Name the drive USB, for ease of access, and ensure it is formatted as a Mac OS Extended (Journaled) drive.

Just create a single partition on the drive for the time being. Make sure you choose to configure the flash drive with a GUID Partition Table (GPT). With the flash drive plugged into your Mac, launch Disk Utility and erase the drive. If you had files on it, make sure you back them up. Preparing the USB Flash Driveįirst, we’ll get our flash drive ready. Once you have all of those things, you can get started installing your macOS High Sierra Public Beta Hackintosh.